24V High-Output COB LED Strip Lights for Smooth, Continuous Illumination
FLUFLUX WAVE+ 24V COB LED Strip Lights provide a brighter, continuous line of light for coves, task areas and architectural details. Each 16.4 ft (5 m) roll can be cut at the marked intervals to fit your layout.
Product Features
- Continuous COB light with no visible diodes
- 3M VHB mounting tape backing for a stronger, longer-lasting bond than standard adhesive tape
- 5W rated power per foot
- 300+ lumens per foot
- CRI 95+ with R9 80+
- 2-step MacAdam color consistency
- Available in 2400K, 2700K, 3000K, 3500K and 4000K
- 10 mm (0.39 in.) wide; field-cuttable every 0.66 in. (16.7 mm)
- Maximum continuous run: 16.4 ft (5 m)
- IP20; for indoor dry and damp locations
Certifications and Warranty
- UL 2108 Listed (File E543849)
- JA8 and California Title 24 compliant
- 65,000-hour rated lifespan
- 6-Year Limited Warranty
Package Includes
- 1 × 16.4 ft (5 m) WAVE+ LED Strip Light roll
- 1 × User Manual and Installation Guide
Power Supply and Dimming
A compatible listed Class 2 24V DC constant-voltage LED driver is required and sold separately. See Accessories for driver sizing and connectors.
Dimming is available with a compatible 24V constant-voltage dimmable driver or control system. Dimming performance depends on the selected driver and control system.
Installation Notes
- Cut only at the marked cut lines.
- Clean and dry the mounting surface before applying the 3M VHB tape.
- For enclosed millwork, mount in an aluminum channel to help dissipate heat.
- For indoor dry and damp locations only. This product is IP20 and is not waterproof.
Your selection
- Series
- Fluflux WAVE+
- SKU
- FL-01-24V-12-1624
- Color temperature
- 2400K
- Roll length
- 16.4 ft (5 m)
Light output
- Brightness
- 319 lm/ft
- Efficacy
- 65 lm/W
- Color rendering
- Ra 97.1 · R9 83
- TM-30
- Rf 92 · Rg 96
- Color consistency
- 2-step MacAdam (SDCM ≤ 2)
- Beam angle
- 180°
Dimensions
- LED type
- COB · 146 per foot
- Strip width
- 0.39 in. (10 mm)
- Strip height
- 0.12 in. (3 mm)
- Cut interval
- Every 0.66 in. (16.7 mm)
Installation
- Max run length
- 16.4 ft (5 m)
- Mounting
- 3M VHB tape
- Operating temperature
- -13°F to 140°F (-25°C to 60°C)
- Ambient temperature
- -40°F to 176°F (-40°C to 80°C)
- Protection rating
- IP20 · Indoor, dry and damp locations
Electrical
- Input voltage
- 24V DC
- Rated power
- 5W per foot
- Driver
- Listed Class 2, 24V DC constant-voltage
- Dimmable
- Yes, with a compatible dimmable driver
Certifications & warranty
- Safety
- UL 2108 Listed · File E543849
- Energy code
- JA8 · California Title 24 compliant
- Rated life
- 65,000 hours
- Warranty
- 6-year limited
Performance by color temperature
| CCT | lm/ft | lm/W | Ra | R9 | Rf | Rg |
|---|---|---|---|---|---|---|
| 2400K | 319 | 65 | 97.1 | 83 | 92 | 96 |
| 2700K | 360 | 72 | 97.8 | 86 | 94 | 98 |
| 3000K | 398 | 79 | 97.1 | 82 | 94 | 98 |
| 3500K | 399 | 80 | 97.4 | 88 | 94 | 99 |
| 4000K | 441 | 88 | 97.0 | 91 | 95 | 101 |
Works with this strip
Wave+ uses a 10 mm board. Connector width must match — 10 mm parts only.
A full 16.4 ft reel draws up to 82 W.One 96 W supply runs the whole reel, at 85% of its rating. That is inside what the supply is rated for, but tighter than the 20% spare capacity we normally suggest — for that, allow 15.4 ft per 96 W supply and feed the rest separately.
Using only part of the reel? Multiply the feet you install by 5 W and add 20% — for example 10 ft × 5 W = 50 W, so a 60 W supply or larger.
Pick the driver from the length you actually install, not the length of the roll. See all 24V drivers →
