Fluflux 24V 2835 Tape Light, 16.4 ft — 500+ lm/ft, CRI 95+, UL Listed - Warm White 3000K # Color Temperature_Warm White 3000K
Fluflux 24V 2835 Tape Light, 16.4 ft — 500+ lm/ft, CRI 95+, UL Listed - Soft White 2700K # Color Temperature_Soft White 2700K
Fluflux 24V 2835 Tape Light, 16.4 ft — 500+ lm/ft, CRI 95+, UL Listed - Neutral White 3500K # Color Temperature_Neutral White 3500K
Fluflux 24V 2835 Tape Light, 16.4 ft — 500+ lm/ft, CRI 95+, UL Listed - Cool White 4000K # Color Temperature_Cool White 4000K
500+ lumens per foot at 4.2 W, up to 22 ft continuous run # Color Temperature_Soft White 2700K
500+ lumens per foot at 4.2 W, up to 22 ft continuous run # Color Temperature_Warm White 3000K
500+ lumens per foot at 4.2 W, up to 22 ft continuous run # Color Temperature_Neutral White 3500K
500+ lumens per foot at 4.2 W, up to 22 ft continuous run # Color Temperature_Cool White 4000K
48 LEDs per foot, 10 mm wide, cuttable every 1.97 in
Low power draw, 50.3 C maximum after 90 minutes at full output
Dot-free output in an aluminium profile, fits most 12 mm channels
CRI 95+ colour rendering compared with a standard LED strip
Flicker-free, smooth 0-100% dimming on stable 24V DC
Cut and reconnect in seconds with a 10 mm solderless connector
3M VHB adhesive peel strength compared with standard tape
Wiring diagram: plug and play, hard wire, and dimming
Roll over image to zoom in Click on image to zoom
Fluflux 24V 2835 Tape Light, 16.4 ft — 500+ lm/ft, CRI 95+, UL Listed - Warm White 3000K # Color Temperature_Warm White 3000KFluflux 24V 2835 Tape Light, 16.4 ft — 500+ lm/ft, CRI 95+, UL Listed - Soft White 2700K # Color Temperature_Soft White 2700KFluflux 24V 2835 Tape Light, 16.4 ft — 500+ lm/ft, CRI 95+, UL Listed - Neutral White 3500K # Color Temperature_Neutral White 3500KFluflux 24V 2835 Tape Light, 16.4 ft — 500+ lm/ft, CRI 95+, UL Listed - Cool White 4000K # Color Temperature_Cool White 4000K500+ lumens per foot at 4.2 W, up to 22 ft continuous run # Color Temperature_Soft White 2700K500+ lumens per foot at 4.2 W, up to 22 ft continuous run # Color Temperature_Warm White 3000K500+ lumens per foot at 4.2 W, up to 22 ft continuous run # Color Temperature_Neutral White 3500K500+ lumens per foot at 4.2 W, up to 22 ft continuous run # Color Temperature_Cool White 4000K48 LEDs per foot, 10 mm wide, cuttable every 1.97 inLow power draw, 50.3 C maximum after 90 minutes at full outputDot-free output in an aluminium profile, fits most 12 mm channelsCRI 95+ colour rendering compared with a standard LED stripFlicker-free, smooth 0-100% dimming on stable 24V DCCut and reconnect in seconds with a 10 mm solderless connector3M VHB adhesive peel strength compared with standard tapeWiring diagram: plug and play, hard wire, and dimming

Fluflux 24V 2835 Tape Light, 16.4 ft — 500+ lm/ft, CRI 95+, UL Listed

Fluflux DirectSKU: FL-02-24V-12-1627
Color Temperature: Soft White 2700K
Price:
$72.99 $82.99

24V High-Output 2835 LED Strip Lights for Efficient, Even Illumination

FLUFLUX LINE+ 24V 2835 LED Strip Lights provide high-output, efficient light for coves, task lighting and signage. Each 16.4 ft (5 m) roll can be cut at the marked intervals to fit your layout.

Product Features

  • 48 high-efficacy 2835 LEDs per foot
  • 3M VHB mounting tape backing for a stronger, longer-lasting bond than standard adhesive tape
  • 4.2W rated power per foot
  • 500+ lumens per foot
  • CRI 95+ with R9 90+
  • 3-step MacAdam color consistency
  • Available in 2700K, 3000K, 3500K and 4000K
  • 10 mm (0.39 in.) wide; field-cuttable every 1.97 in. (50 mm)
  • Maximum continuous run: 22 ft (6.7 m)
  • IP20; for indoor dry and damp locations

Certifications and Warranty

  • UL 2108 Listed (File E543849)
  • JA8 and California Title 24 compliant
  • 65,000-hour rated lifespan
  • 7-Year Limited Warranty

Package Includes

  • 1 × 16.4 ft (5 m) LINE+ LED Strip Light roll
  • 1 × User Manual and Installation Guide

Power Supply and Dimming

A compatible listed Class 2 24V DC constant-voltage LED driver is required and sold separately. See Accessories for driver sizing and connectors.

Dimming is available with a compatible 24V constant-voltage dimmable driver or control system. Dimming performance depends on the selected driver and control system.

Installation Notes

  • Cut only at the marked cut lines.
  • Clean and dry the mounting surface before applying the 3M VHB tape.
  • For enclosed millwork, mount in an aluminum channel to help dissipate heat.
  • For indoor dry and damp locations only. This product is IP20 and is not waterproof.

Your selection

Series
Fluflux LINE+
SKU
FL-02-24V-12-1627
Color temperature
2700K
Roll length
16.4 ft (5 m)

Light output

Brightness
528 lm/ft
Efficacy
125 lm/W
Color rendering
Ra 96.5 · R9 97
TM-30
Rf 96 · Rg 103
Color consistency
3-step MacAdam (SDCM ≤ 3)

Dimensions

LED type
2835 SMD · 48 per foot
Strip width
0.39 in. (10 mm)
Strip height
0.06 in. (1.5 mm)
Cut interval
Every 1.97 in. (50 mm)

Installation

Max run length
22 ft (6.7 m)
Mounting
3M VHB tape
Operating temperature
-13°F to 140°F (-25°C to 60°C)
Ambient temperature
-40°F to 176°F (-40°C to 80°C)
Protection rating
IP20 · Indoor, dry and damp locations

Electrical

Input voltage
24V DC
Rated power
4.2W per foot
Driver
Listed Class 2, 24V DC constant-voltage
Dimmable
Yes, with a compatible dimmable driver

Certifications & warranty

Safety
UL 2108 Listed · File E543849
Energy code
JA8 · California Title 24 compliant
Rated life
65,000 hours
Warranty
7-year limited

Performance by color temperature

CCTlm/ftlm/WRaR9RfRg
2700K52812596.59796103
3000K51112497.39896103
3500K52212698.39996102
4000K52612897.79196102

Works with this strip

Line+ uses a 10 mm board. Connector width must match — 10 mm parts only.
A full 16.4 ft reel draws up to 69 W.One 96 W supply runs the whole reel with headroom to spare.
Using only part of the reel? Multiply the feet you install by 4.2 W and add 20% — for example 10 ft × 4.2 W = 42 W, so a 51 W supply or larger.

  • This itemFluflux 24V 2835 Tape Light, 16.4 ft — 500+ lm/ft, CRI 95+, UL Listed

    FL-02-24V-12-1627 · add it with the button above

    $72.99

  • Power connector — 10 mm · 10-pack

    Feeds power into the start of a run.

    $17.49

  • Jumper connector — 10 mm · 10-pack

    Bridges a gap or turns a corner between two cut sections.

    $20.49

  • 24V driver — 60W

    Carries up to 11.4 ft of this strip (48 W usable at 80% loading).

    $66.99

  • 24V driver — 96W

    Carries up to 18.3 ft of this strip (77 W usable at 80% loading).

    $89.99

Selected: —

Pick the driver from the length you actually install, not the length of the roll. See all 24V drivers →

What power supply do I need?

  • A listed Class 2 24V DC constant-voltage power supply, sold separately. This strip is rated 4.2 W per foot, so a full 16.4 ft roll draws about 69 W. Sized at 80% of its rating, the Fluflux 60 W driver carries up to 11.4 ft and the 96 W driver up to 18.3 ft of this strip. Size from the length you actually install; the Accessories tab shows the matching drivers.

Can I use a 12V power supply?

  • No. This strip is for 24V DC only. For 12V systems, see the WAVE 12V COB strip.

How long can one run be?

  • Up to 22 ft (6.7 m) from a single feed point. For a longer installation, divide it into runs of that length or less and feed each run separately.

Can I cut the strip?

  • Yes, every 1.97 in. (50 mm) at the marked cut lines. Reconnect cut sections with the Fluflux 10 mm solderless power and jumper connectors.

Is it dimmable?

  • Yes, with a compatible 24V constant-voltage dimmable driver or control system. The Fluflux 5-in-1 drivers support phase-cut (TRIAC, ELV, MLV), 0-10V, 1-10V, 10V PWM and potentiometer dimming.

Where can I install it?

  • Indoor dry and damp locations such as coves, under cabinets, shelving and display cases. It is IP20 and not intended for outdoor use, wet locations or direct exposure to water.

What surfaces does it stick to?

  • The 3M VHB tape bonds to clean, dry metal, aluminum channels, glass, wood, smooth plastic, tile and painted surfaces. Clean the surface first; for enclosed millwork, mount the strip in an aluminum channel to help dissipate heat.

Is it UL Listed and Title 24 compliant?

  • Yes. It is UL 2108 Listed (File E543849) and JA8 compliant for California Title 24.

How long is the warranty?

  • 7 years (limited warranty).

Documentation

Certification & Warranty

Photometric Files (IES)

Color Rendering Reports (TM-30)

You may also like

Recently viewed