FLUFLUX 60W 24V Dimmable LED Driver, 110–277V AC, cULus, IP65

Fluflux DirectSKU: FD-01-24V-DIM01-60W

Price:
Sale price$66.99

Professional-Grade 60W 24V Dimmable LED Driver

The FLUFLUX 60W constant-voltage LED driver converts 110–277V AC input to regulated 24V DC output at up to 2.5A. Designed for professional LED tape lighting systems, it combines versatile dimming control, a durable weather-resistant enclosure, and built-in electrical protection for residential, commercial, and architectural lighting applications.

Why Choose This Driver

  • 60W regulated output: Delivers 24V DC constant-voltage output at up to 2.5A.
  • Versatile dimming control: Compatible with forward-phase and reverse-phase dimming, including TRIAC, ELV, and MLV, as well as 0–10V, 1–10V, 10V PWM, and potentiometer controls.
  • Wide-voltage input: Accepts 110–277V AC input for residential and commercial installations.
  • Built-in protection: Provides short-circuit, overload, and overtemperature protection.
  • Certified construction: cULus Listed to UL 8750 under file E554158, with Class 2 and Class P classifications.
  • Durable enclosure: IP65 and NEMA 4X rated for dry, damp, and wet locations when properly installed.
  • Professional hardwired design: Features an aluminum housing with a built-in junction box for permanent installations.

Load Requirements

The driver is rated for a maximum output of 60W at 24V DC. For improved long-term reliability, the recommended continuous connected load is 48W or less. Always calculate the complete LED system load before installation and do not exceed the driver’s maximum rated output.

Installation Notes

  • Installation must be completed by a qualified electrician.
  • Confirm that the connected lighting system operates at 24V DC constant voltage.
  • Maintain adequate airflow around the driver.
  • Do not install the driver inside a completely sealed enclosure.
  • Use appropriate strain-relief fittings for all incoming and outgoing cables.
  • Strain-relief fittings are required and are not included.
  • Do not submerge the driver or install it where standing water may accumulate.
  • Disconnect power before wiring, inspection, or servicing.

Model: FD-01-24V-DIM01-60W

Model: FD-01-24V-DIM01-60W

Output Mode: Constant Voltage

Rated Output: 60W / 24V DC / 2.5A

Recommended Continuous Load: Up to 48W

Input Voltage / Frequency: 110–277V AC / 50–60Hz

Typical Efficiency: 87% at 120V AC / 88% at 277V AC

Dimming Methods: Phase-cut (TRIAC, MLV, and ELV), 0–10V, 1–10V, 10V PWM, and potentiometer

Phase-Cut Compatibility: Forward phase and reverse phase

Output PWM Frequency: 4,000Hz

Protection: Short-circuit, overload, and overtemperature protection

Product Dimensions (L × W × H): 6.22 × 4.85 × 1.65 in / 158 × 123.4 × 42 mm

Knockout Diameter: Ø0.86 in / 22 mm

Housing / Wiring: Aluminum housing / Hardwired / Built-in junction box

Location / Enclosure Rating: Dry, damp, and wet locations / IP65 / NEMA 4X

Ambient Operating Temperature: −40°C to +60°C

Safety / Classification: cULus Listed / UL 8750 / Class 2 / Class P

UL File Number: E554158

Warranty: 5-year limited warranty

What type of LED lighting is this driver designed for?
This driver is designed for 24V DC constant-voltage LED lighting, including compatible LED tape lights and other 24V LED products.

What is the maximum connected load?
The driver is rated for a maximum output of 60W and 2.5A. For continuous operation, we recommend keeping the connected load at or below 48W.

Which dimming methods are supported?
It supports TRIAC, ELV, MLV, 0–10V, 1–10V, 10V PWM, and potentiometer dimming. Actual dimming performance may vary depending on the dimmer, LED load, and installation conditions.

What input and output voltage does it support?
The input range is 110–277V AC, and the output is 24V DC constant voltage.

Can this driver be used outdoors?
The enclosure is rated IP65 and NEMA 4X. It is protected against dust and water jets but must not be submerged. Installation must comply with applicable electrical codes and site conditions.

What protection features are included?
The driver includes short-circuit, overload, and overtemperature protection.

Is this LED driver UL Listed?
Yes. It is UL Listed to UL 8750 under file E554158 and is classified as Class 2 and Class P.

What is the warranty period?
This product is covered by a 5-year limited warranty.

Should installation be completed by a professional?
Yes. Installation should be completed by a qualified electrician. Disconnect power before installation and confirm that the LED load and dimming system are compatible.

You may also like

Recently viewed