Fluflux 10mm Solderless Power Connectors for LED Strip Lights, 10-Pack

10 mm Solderless Power Connectors for LED Strip Lights

The FLUFLUX 10 mm solderless power connector connects a cut 10 mm LED strip to its power supply, with no soldering. Cut the strip at a marked cut line, slide it into the connector and tighten the two screws.

Product Features

• Pre-installed 6 in. (152 mm) 20 AWG lead, red (+) and black (−)
• Solderless: screw-down terminals tightened with a 2 mm Phillips screwdriver
• Pre-installed 3M VHB adhesive on the back for secure mounting
• Fits 10 mm single-color strip: Fluflux WAVE+ 24V COB (5 W/ft), LINE and LINE+ 24V 2835
• 12–24V DC; up to 5 A at 12V or 4 A at 24V
• Transparent housing to check the strip is fully seated

Compatibility

• For 10 mm single-color strips: Fluflux WAVE+ 24V COB (5 W/ft), LINE and LINE+ 24V 2835
• Not for 8 mm strips (WAVE 24V and WAVE 12V); use the 8 mm connectors
• Not for multi-channel strips such as RGB or tunable white

Package Includes

• 10 × 10 mm solderless power connectors with 6 in. leads
• 1 × 2 mm Phillips screwdriver for the terminal screws

Installation Notes

• Cut the strip only at a marked cut line.
• Match polarity: strip (+) to the red wire and (−) to the black wire.
• Tighten the screws securely, but do not overtighten; that can crack the connector.
• The 3M VHB tape adds about 0.04 in. of height; peel it off if the connector does not fit the channel.
• For indoor use, -4°F to 122°F (-20°C to 50°C).